Automatic tracking and positioning fire extinguishing device (5L)
- Details
- Parameter
Product shooting
Product introduction
With the development of society, various high-rise buildings are constantly emerging. The span of high-rise buildings is generally over 100 meters, and even ordinary office buildings are over 10 meters. As a result, new challenges have also been brought to the fire protection technology of these facilities. Compared to such buildings, the traditional indoor automatic sprinkler fire extinguishing system has a weak fire extinguishing effect. The automated fire extinguishing device developed by our company perfectly fills this need.
The ZDMS automatic fire extinguishing device is a fully automatic fire extinguishing device that uses infrared guidance, ultraviolet scanning, and microelectronic control technology. It only takes 30 seconds from discovering a fire, accurately locating it, and spraying fire extinguishing agents, quickly and accurately extinguishing the fire in its budding state. If a fire occurs within its protection range, the device will start immediately, automatically scan and precisely locate the fire source. Once the fire source is confirmed, it will immediately open the solenoid valve to spray water to extinguish the fire. This device can not only extinguish fires but also avoid water damage, making it a modern and intelligent fire extinguishing equipment. The system has the characteristics of modular structure, easy installation, simple wiring, easy debugging, low cost, few devices, simple wiring, and low failure rate. Some connecting wires are specially provided by the manufacturer (aviation plug connecting wires) to avoid the possibility of improper wiring.
Parameter configuration
Installation height range: 6-22m
Maximum protection radius: 30m
Rated flow rate: 5L/s
Rated working pressure: 0.6MPa
Maximum working pressure: 1.0MPa
Rated voltage: DC24V
Rated power: 40W
Communication method: RS485
Fire response time: ≤30s
Horizontal rotation range: 0-360° (adjustable)
Vertical rotation range: inclination angle 10°, declination angle 85°
Operating environment temperature: 4-55℃
Interface diameter: DN32
Installation method: flange
Dimensions: 300X380X500mm
Construction site
After-sales service
1. Quality assurance:
(1) The seller guarantees to provide products that are technologically advanced, structurally reasonable, safe, mature, and reliable.
(2) The design, manufacture, and inspection of the equipment comply with the relevant national specifications and standards.
(3) Quality assurance: One year from the installation and testing of the equipment after passing.
(4) Performance guarantee: The provided equipment meets the performance indicators required by the technical specifications.
(5) In addition to special circumstances, all equipment provided by the manufacturer can be installed once and is of good quality without the need to frequently replace equipment during the installation process.
2. Service commitment:
(1) Provide technical information and drawings according to the contract in a timely manner.
(2) Provide technical services as required by the demand side.
(3) Strengthen pre-sales, in-sales, and after-sales services, and implement services throughout the entire process of product manufacturing, installation, commissioning, and maintenance.
(4) Once the manufacturer receives information on quality issues reported by the demand side, they will respond within 24 hours, and send service personnel to the site as soon as possible to ensure that the service is not interrupted even if the user is dissatisfied with the quality.