Automatic Tracking and Locating Fire Extinguishing Device (20L)

Product Specification: ZDMS0.8/30S

  • Details
  • Parameter
Product Photography

Product Introduction

With the development of society, various high-rise buildings continue to emerge. The span of high-rise buildings is generally over 100 meters, and even regular office buildings are over ten meters high. As a result, there are new challenges in terms of fire protection technology for such buildings. Traditional indoor automatic sprinkler systems have weak extinguishing effects compared to such buildings. Our company's automatic tracking fire extinguishing device fills this need.
The ZDMS automatic tracking fire extinguishing device adopts infrared guidance, ultraviolet scanning, and microelectronic control technology. It only takes 30 seconds from discovering a fire to precise positioning and spraying fire extinguishing, quickly and accurately extinguishing fires in its embryonic state. If a fire occurs within its protection range, the device will immediately start, automatically scan and accurately locate the fire source. Once the fire source is confirmed, the electromechanical valve will immediately open to spray water and extinguish the fire. This device can not only extinguish fires but also avoid water damage and is a modern intelligent fire extinguishing equipment. The system is modular in structure, easy to install, easy to wire and debug, has low cost, few equipment, simple wiring, low failure rate, and other features. Some connection lines are specially matched by the manufacturer (aviation plug connection lines) to avoid the possibility of multiple wires being wrongly arranged.

Parameter Configuration

Installation height range: 8-30m

Maximum protection radius: 50m

Rated flow rate: 20L/s

Rated working pressure: 0.8MPa

Maximum working pressure: 1.6MPa

Rated voltage: DC24V

Rated power: 80W

Communication method: RS485

Fire response time: ≤30s

Horizontal rotation range: 0-360° (adjustable)

Vertical rotation range: 30° upward, 85° downward

Operating environment temperature: 4-55℃

Interface diameter: DN80

Installation method: Flange

Dimensions: 680X350X400mm

Construction Site