Automatic tracking and positioning fire extinguishing device (30L)

Product specifications: ZDMS0.8/30S

  • Details
  • Parameter
Product Shooting

Product Introduction

With the development of society, various tall and large buildings are continually emerging. The spans of these buildings generally exceed 100 meters, and even ordinary office buildings are over ten meters. This has brought new challenges in terms of fire-fighting equipment technology. Compared to such buildings, the traditional indoor automatic sprinkler system has very weak firefighting effects. The automatic searching fire-fighting device developed by our company fills this need.
The ZDMS automatic searching fire-fighting device is a fully automatic firefighting device using infrared guidance, ultraviolet scanning, and microelectronic control technology. It discovers and accurately positions the fire and sprays firefighting water in just 30 seconds, quickly and accurately extinguishing the fire in its nascent state. If a fire occurs within its protection range, the device will immediately start, automatically scan and accurately locate the source of the fire, and then immediately open the electromagnetic valve to spray water and extinguish the fire. This device can extinguish fires and avoid water damage, making it a modern intelligent firefighting equipment. The system is modular, easy to install and wire, easy to debug, low cost, and with few devices and simple wiring, resulting in low failure rates. Some of the connection cables are specially prepared by the manufacturer (aviation plug connection cables) to avoid the possibility of mis-wiring with many cables.

Parameter Configuration

Installation height range: 8~30m

Max protection radius: 55m

Rated flow rate: 30L / s

Rated working pressure: 0.8MPa

Max working pressure: 1.6MPa

Rated voltage: DC24V

Rated power: 80W

Communication mode: RS485

Fire response time: ≤30s

Horizontal rotation range: 0 ~ 360° (adjustable)

Vertical rotation range: elevation angle 30°, depression angle 85°

Operating ambient temperature: 4 ~ 55℃

Interface diameter: DN80

Installation method: flange

Dimensions: 680X350X400mm

Construction site