Automatic tracking positioning fire extinguishing device (10L)

With the development of society, various high-rise buildings with large spaces are constantly emerging. The span of high-rise buildings is generally over one hundred meters, and even a typical office building is over ten meters high. As a result, new challenges arise in fire-fighting technology for such buildings. Traditional indoor automatic sprinkler fire-fighting systems have relatively weak fire-fighting effects on such buildings. Our company's automatic fire-fighting device with self-searching function fills this market demand.
The ZDMS automatic fire-fighting device is a fully automatic fire-fighting device that uses infrared guided ultraviolet scanning and microelectronics control technology. It can detect and locate a fire, and discharge fire-extinguishing agents within 30 seconds, quickly and accurately extinguishing the fire in its nascent state. If a fire occurs within its protection range, the device will immediately start, automatically scan and locate the fire source, and once the fire source is confirmed, the electromagnetic valve will immediately open to discharge water for fire-fighting. This device can not only put out fires but also avoid damage from water. It is a modern and intelligent fire-fighting device. The system is modular in structure, easy to install, simple to wire, easy to debug, low in cost, has few devices, simple in wiring, and has a low failure rate. Some connecting wires are specially supplied by the manufacturer (aviation plug connecting wires) to avoid the possibility of multiple wires being connected incorrectly.

Installation height range: 6 to 22 meters
Maximum protection radius: 35 meters
Rated flow rate: 10 L/s
Rated working pressure: 0.6 MPa
Maximum working pressure: 1.0 MPa
Rated voltage: DC24V
Rated power: 40W
Communication method: RS485
Fire response time: ≤30s
Horizontal rotation range: 0 to 360° (adjustable)
Vertical rotation range: 10° inclination angle, 85° declination angle
Operating environment temperature: 4 to 55℃
Interface diameter: DN32
Installation method: flange
Dimensions: 300X380X500mm